XGN Fixed-Type Closed Switchgear High Voltage12KV 24KV 36KV Stainless Steel Distribution Cabinet Three Phase AC Metal Enclosed Control Panel Box

Features:

●XGN switchgear uses sealed metal box-type structure,and the framework of cabinet is welded by angle steel and steel sheet.

●The cabinet is divided into circuit breaker compartment, busbar compartment,cable compartment and relay compartment,separated by steel plate between two compartments.

● The switchgear was set by a front and a back door.And it is installed away from the wall and could be maintained from both sides.

●A pressure relief channel is provided at the top of the cabinet.If internal arcing fault occurs,it is able to release pressure and discharge gas from the pressure relief channel to ensure the safety of operators.

● The switchgear has a perfect "Five-prevention,with simple and clear operation procedures.
·The main circuit breakers that the switchgear using are ZN28-12,ZN63A,
VCA,etc.series vacuum circuit breakers;and other types of circuit breakers can also be used according to the requirements.

● The disconnecting switch is GN30 rotating disconnecting switch or GN22big current disconnecting switch.

Environmental Conditions
·Ambient Temperature:No more than+40C and no less than -15C.Average temperature is no more than +35C within 24 hours.
● Altitude:No more than 1000m.
·Relative Humidity:the average daily value is no more than 95%, the average monthly value is no more than 90%.
● Earthquake Intensity:No more than 8 degrees.
● Vapor pressure:average daily value is no more than 2.2kPa,average monthly value is no more than 1.8kPa.
● Installation locations without fire,explosion danger,serious pollution,chemical corrosion and violent vibration.