Leave Your Message
Online Inuiry
53d365b3-6f89-4893-96a3-d70d895f9b81Wechat
27d442a5-5d9b-4e33-a816-996fe42856d8Whatsapp
6503fd048f54d46697
Products Categories
Featured Products

ADSS Overhead Fiber Optic Cable Clamp Fittings Hardware Thermoplastic SM94 Suspension Clamp Plastic Hook Bracket Aluminium Alloy Tension Clamp FTTH

The assembly is made of the suspension clamp itself equipped with an adjustable grip device, the body is linked to the aluminium alloy die casted bracket by a movable link Suspension clamp and movable link are made of anti UV stabilized black thermoplastic fiber glass reinforced.

    Technical Specification

    Dimensions Cable Size: 16-95mm2

    Mechanical Breaking Load: 15KN

    Tightening torque: By hand

    Specification

    Use: SM94 is used for the suspension of ABC insulated messenger. It can be used in straight lines and line angles. Maximum line angle is 90 degrees.

    Construction: The aluminium body of the clamp is coated all over with plastic, except for the upper U-shaped portion where the clamp is hung on the pole hook.

    Installation: Hang the clamp on the suspension hook. Separate the messenger wire, resting on a pulley, from the cable. If needed, use separation wedges or other suitable tool in separating the messenger. Insert the messenger wire into the clamp's conductor groove.l Loosen the wing nut a little bit, and place the keeper snugly against the messenger. Tighten the wing nut firmly by hand. Do not use any tool in tightening the wing nut-firm tightening by hand is enough. Remove the pulley and separation wedges. Recommended practice is to tie the cable with nylon ties on both sides of the clamp.

    Standard: NFC 33-042; EN 50-483

    SM94详情.jpg